English Polski
Fiber Optic Patchcord, MPO, Female, OS2, Method A, 15m

DIGITUS Fiber Optic Patchcord, MPO, Female, OS2, Method A, 15m

Product number: DK-2966-15
EAN: 4016032345206

DIGITUS Fiber Optic Patchcord, MPO to MPO, Female OS2, Singlemode 09/125 µ, 15m, Method A

High-performance solutions designed for efficient and scalable connectivity in data centers.

  • Enhanced data transfer rates
  • Ultra-Low Loss
  • Slim and flexible
  • Enables quick deployment
  • Robust design

More product information

Distribution Partner Overview

Description

The MPO patch cable allows datarates of 40Gb/s or 100Gb/s and is the answer of the needed growing bandwidths of datacenters. The standardized IEC61754-7 and TIA/EIA 604-5 MPO Plug guaranteed the best performance in the whole network and is hardly larger than an standard RJ45 plug. The excellent damping and the compact design makes this patch cable to the first choice, if we talk about bandwidth and performance.

Technical details

  • Connector: MPO female
  • Polish : APC
  • Type : Method A
  • Fibre type : SM-G652D, 9/125µ, OS2
  • Fiber Count : 12
  • Cable outer diameter : 3 mm
  • Cable diameter: 3 mm
  • Cable jacket: LSOH
  • Color cable: yellow
  • Fiber class: OS2
  • Fiber diameter: 9/125µ
  • Mode: Singlemode
  • Number of connectors side 1: 1
  • Number of connectors side 2: 1
  • Number of fibers: 12
  • Length: 15 m

Package content

  • 1 x Fiber Optic Patchcord, MPO, Female, OS2, Method A, 15m

Logistics

  Number
(pcs) 		Weight
(kg) 		Depth
(cm) 		Width
(cm) 		Height
(cm) 		cm³
Packaging Unit Carton 80 9,80 40,00 40,00 30,00 48.000,00
Packaging Unit Inside 1 0,12 2,00 20,00 29,00 1.160,00
Packaging Unit Single 1 0,12 2,00 20,00 29,00 1.160,00
Customs tariff number: 85447000

Safety notes

  • Avoid direct contact with light sources: Fiber optic cables, especially those with active light sources such as lasers (e.g. in optical communication systems), can emit dangerous radiation that can damage eyes. Take care never to look directly into the li
  • When working with fiber optic cables, especially during tests or when working with lasers, protective goggles should always be worn to protect against harmful radiation.
  • When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
  • Do not kink or crush: Fiber optic cables are sensitive to mechanical stress.
  • To protect cables from physical damage, they should be laid in special ducts or with protective materials
  • Keep cable connectors clean: Fiber optic cables are sensitive to dust and dirt. Even small particles on the connectors can severely impair the signal quality.
  • Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
  • Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately.

EU responsible person

EU based economic operator ensuring the product complies with the required regulations.

ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com