DIGITUS Network Rack Dynamic Basic Series - 600x800 mm (WxD)

Product number: DN-19 22U-6/8-DB

EAN: 4016032350286

22U network rack, Dynamic Basic 1155x600x800 mm, color black (RAL 9005)

The DIGITUS® Dynamic Basic Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany

Roof is prepared for fan units (punched out entries)
Lockable pivot lever on front door
Base with punched out cable entry, covered with screwed metal plate

More product information

Distribution Partner Overview

Print view ›

Product comparison table ›

‹

›

Description

The network cabinets from the Dynamic series were developed for easy and especially cost-optimized network expansion. Clever placement of the cable inlets ensures effortless installation for every application. They are located at the back center in the floor structure, protected by a bolted cover plate. Cabinets from a width of 800 mm also feature cable inlets with a plastic cover to the left and right. These are also integrated into the roof (1 x for 600 mm cabinet width, 3 x for 800 mm cabinet width). To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable side and back walls as well as lockable and removable front door improve accessibility. The door hinges can be switched. Furthermore, the cabinets can be completely dismantled if necessary due to their collapsible design.

Technical details

Safety class rating IP20
Lateral metal struts front door with safety glass
Lock system with pivot lever on front door
120° door opening angle on the front door
1-point-locking-mechanism on the front door
Rear wall and side panels are lockable and detachable
incl. 4 pieces of leveling feet already pre-configured under the rack
483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized
483 mm (19“) profile rails are adjustable in depth and with height unit marking
Base with punched out cable entry, covered with screwed metal plate
Roof with punched out cable entries with plastic covers
Roof is prepared for fan units (punched out entries)
Several earthing points for rack components
Incl. installation set (screws, cage nuts, washers)
Rack is completely mounted
Equipment mounting depth min.-max.: 430-750 mm
Cabinet type: Network cabinet
Color: black, RAL 9005
Depth: 800 mm
Front door: Glass door, single opening
Load capacity: 600 kg
Rear door: Rear panel with lock, detachable
Side panels: Both sides
Units: 22
Width: 600 mm
IP protection class: IP20
Mounted: yes

Package content

Earthing wire set
Installation set (screws, cage nuts, washers)
2 x keys

Downloads and Certificates

Datasheet

Manual

QIG

QIG Fan units EN DE

Logistics

	Number (pcs)	Weight (kg)	Depth (cm)	Width (cm)	Height (cm)	cm³
Packaging Unit Carton	1	44,00	85,00	65,00	120,50	665.762,50
Packaging Unit Inside	1	44,00	85,00	65,00	120,50	665.762,50
Packaging Unit Single	1	44,00	85,00	65,00	120,50	665.762,50